Software Our software is broken into five modules: The five modules include: Designer, Cut Manager and Output, Setup and Update. Designer imports HPGL or DXF files Cut Manager is the heart of working with the advanced features of the software. Inclusion parameters for specific turntable operations, sequential filing of profiles to be cut on the turntable, multiple copy selection and job specific material assignments are configured in Cut Manager. Output is your complete bi-directional interface with the cutter. Serial communication ensures that data can be sent to the cutter and information such as wire location data can be sent back to the computer screen via the Controller. The last two modules are very seldom used but we have provided a short explanation. Setup is the program to setup the parameters of the particular machine being driven (Pro, Industrial, Standard, with or without TurnPro). Settings in here need only to be set upon initial installation. Update is a firmware update utility for the EEPROM located in the Controller. The EEPROM chip (a programmable computer chip) contains software (called firmware) to run the cutter. Foam Art from Mad Dog - Clipart Cutting Software The Mad Dog software is a collection of 750 hand drawn images very suitable for cutting on our cutters. Every design can be scaled larger or smaller in your design software that supports vector based images (Such as CorelDraw). This product is included with all computerized systems!